UAN Steel supplies a comprehensive range of standard N grade, 500 MPa deformed reinforcing bar (D500N). Length is available as your request as the reinforcing bar is often supplied processed or fabricated to suit the specific requirements of the project.

These processed bars are normally used to tie reinforced masonry or concrete walls to slabs or footings, as designed by the engineer. Cut and bent to shape from standard deformed reinforcing bar, grade D500N. Common shapes are listed but others can be made to order. Meet the requirements of AS/NZS 4671.

These bars are used to tie together two elements of a structure that are at right angles to each other, such as walls, slabs or beams, as designed by the engineer. Cut and bent to shape from standard deformed reinforcing bar, grade D500N.

Others can be made to order. Meet the requirements of AS/NZS 4671.

A full range of ligatures (fitments) manufactured from round reinforcing bar, grade R250N, to suit all requirements. It is commonly used to separate top and bottom layers of Trench Mesh in residential slabs or for fabricating beam or column cages. Common square and rectangular shapes in 6mm and 10mm bar are listed below.

 Other shapes and sizes can be manufactured to order. All ligatures meet AS/NZS 4671.