Chairsand spacersfor concreting provide support for both reinforcing mesh and bar, ensuring that the correct cover of concrete over the reinforcement is achieved.
A full range of the most common bar chairs, manufactured from selected plastics for superior performance, tested to exceed loads of 200kg available in: 25 & 40, 50 & 65, 75 & 90, 85 & 100mm cover.
Clip-on Chairs. The easy clip-on mechanism ensures correct placement, when walking on, or moving the reinforcing mesh, tested to exceed loads of 200kg available in the popular 50 & 65mm size.
SOG Clip-on Chairs. A high load bar chair tested to exceed loads of 300kg, eliminating voids in the concrete, with the convenience of a side-clip mechanism, can also be used as trench mesh support available in: 50&65mm cover.
Ideal for - Slab on ground - Pod slabs - Swimming pools
Trench Mesh Chairs are the ideal system for placing trench mesh and maintaining concrete cover to the reinforcement. Trench Mesh Chairs save time and keep the reinforcement securely in position during the concrete pour.
·Suitable for use with L8TM, L11TM, L12TM trench mesh and N12 bars
·Help maintain correct minimum bottom and edge cover
·Compensate for any unevenness in the excavation
Suitable for trench mesh and Z cages in strip footings and raft slabs.
The extensive range of circular spacers are designed and manufactured from quality plastics for strength and stability. The unique design offers accurate cover for 360 degrees. It will not twist when in position due to the in-built sleeves which adjusts to hold the bar firmly. As the size of the bar increases the cover remains the same. The spacer is designed to be connected to the fitment so that it is in a vertical position enabling it to rotate when the formwork is assembled.
Constant cover even with rotation huge range to suit three bar sizes rust free Avoids rust migration STABLE Sleeved clips prevents twisting & holds bar firmly.
Ideal for - Civil precast and commercial construction. Columns and piers. Bar spacers in conduit.
Fast clip-on bar chairs. Two head sizes. Takes from 4mm to 36mm bar. Clip-in bases also available. Easy clip-on for easier steel fixing grey to match concrete. Minimal exposure small foot configuration.
The extensive range of fast clip-on bar chairs (FCB’s) are designed to make steel fixing and traceability easier, with each chair identified by cover. They are made from quality materials and come in two head sizes to accommodate different bar sizes, one for bar 4mm to 20mm and the other for bar 20mm to 36mm. The convenient, economical range is designed for minimal exposure and colored grey to match the concrete. Greater stability and less exposure can be achieved where necessary with the use of clip-in bases, available in two heights, 15 and 25mm.
Ideal for -precast and tilt-up -suspended decks -beams, walls and panels.
A versatile range of fast clip-on chairs for mesh support. Mesh Chairs are available in a wide range of cover sizes from 20mm with extensions and bases to 170mm. The chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability. Color coded grey, the chair bases and extensions have minimal exposure, ideal for tilt-slab, precast panel and suspended deck applications. Bases of either 15 or 25mm can be used to increase cover and stability and minimize exposure. Flat circular bases of 80mm diameter are also available for slab on ground applications.
The top deck chair supports both top mesh and top reinforcing bars in suspended decks, thick precast and tilt-up panels and any tall spacer applications, where strength and stability is critical. Load tested to over 300 kg, the chair leaves a minimal foot print and is supplied in a grey colour. Unlike wire alternatives, the top deck chair offers dual heights, will not rust or spread under normal construction loads and can still be handled in extreme heat. An added feature is a cross bar between the dual supports, to allow tying the reo with wire, if required. All top deck spacers are combination dual heights: 65/75mm, 90/100mm, 110/120mm, 130/140mm, 150/160mm, 170/180mm and 190/200mm. Ideal for Top reo in Suspended Decks or Beams, Thick Precast and Tilt-Up Panels, Thick Concrete Elements and All reo especially bars exceeding 16mm.
The heavy duty clip-on range is a replacement for concrete blocks and wire chairs in the heavy precast market, overcoming concrete compatibility, moisture retention and rust problems. A quick easy to use bar chair which is versatile, strong and robust. The heavy duty bar chair has been tested to 200kg in most cases, ensuring it will support heavy loads on site. Steel fixers walking freely on the bar or mesh, will be greatly impressed with its strength and stability. Ensuring minimum cover requirements has never been easier. The range is versatile in the range of bar sizes they can accommodate, Y12 and Y16 as a clip-on and also up to Y28 in non clip-on applications. Quality plastic used in the manufacture and the compact design adds to their strength and the grey color blends in with the concrete.
Tilt-wall and Panel Chairs support single layered mesh in tilt-up, precast panels and some suspended deck applications. The chairs provide covers of 50 and 60mm as well as 65 and 75mm to suit popular panel thicknesses of 100, 120, 130, 150 and 170mm. With four strong stable legs the chair can support the mesh whilst walking over it without collapsing or tipping. Dimples located at the base of the legs ensure minimum exposure and the chair is colored a consistent grey to match the concrete. The easy push on clip mechanism allows the chair to swing into a vertical position, when lowering the mesh into the form and suits all mesh sizes including Y12 bars.
